EPSILON cranes for cable yarding and timber transport - S280L94 und M12Z

05. décembre 2019
Partager des actualités:
TIMBER CRANE PALFINGER EPSILON M12Z and TIMBER CRANE PALFINGER EPSILON S280L94 in action. The development department at PALFINGER EPSILON has always been open to new customer requests and is able to come up with a lot of ideas for their requirements. Since autumn 2015 the cable yarding systems manufacture Mayr-Melnhof Forsttechnik is the proud owner of the first Syncrofalke with PALFINGER EPSILON S280L94. Since then the system has proven itself and more than 50 units have already been delivered.

Extensive load measurements carried out at the University of Leoben resulted in the technical specification for the PALFINGER EPSILON S280L94 – a log crane with a net slewing torque of around 50 kNm (gross 58.7 kNm). The crane also has a reach of 9.4 m and a lifting moment of 229 kNm at a working pressure of 250 bar. At its maximum outreach, a total weight of 2,353 kg can be hung from the crane boom tip, which will leave enough remaining lifting power for manoeuvring larger pieces of timber once the unit weight has been deducted. Because working with the cables results in extremely high forces, on the base of the crane in particular, the base was completely overhauled for Mayr-Melnhof and adapted to their special requirements. In addition to a general optimisation of the steel components and the use of the latest welding processes, the slewing cylinders were also specially adapted to the high torques. In order to ensure consistently high quality and a long service durability, the cylinders, like an average of 80 percent of all steel components in every crane, are produced by PALFINGER itself.

Further information about the PALFINGER EPSILON crane S280L94 and MM Forsttechnik can be found here: https://www.palfingerepsilon.com/en/Newsroom/MM-Forsttechnik-counts-on-EPSILON-customer-specific-crane-development-for-cable-yarding-technology-presented-at-Austrofoma_n_1437

Perfect teamwork: After the wood was successfully transported to the forest road with the rope crane and the EPSILON S280L94, a wood transporter with NEXT EPSOLUTION M12Z and Classic Drive is already waiting to be used. The PALFINGER EPSILON M-Series is a perfect unity of design, comfort and technology. The result is a product that fulfils every individual requirement, and even exceeds expectations. The PALFINGER EPSILON M-Series is a system that serves´ every individual requirement, and customers can rely on a product that unites the very best in design, comfort and technology.

The PALFINGER EPSILON M-Series – The crane for your requirements.

Further information and technical data on the M-Series can be found on the product website:

https://www.palfingerepsilon.com/en/Forestry/Wood-haulage/M-Serie-Next-Epsolution

Partager des actualités:

Revue de presse